- Joined
- May 3, 2017
- Messages
- 1,997
Oops!Good news, the lathe is now mine and is in my shed. Still sitting in the trailer, so still to unload.
It came with 4 micrometers, 2 in cases, small and medium. Also 2 smalls, which are unloved, gunked up and lying in the bottom of the drill
bit box.
Now for a stupid question, the oil level is at the bottom of the LHS sight glass, where do I put more in?
For those who would like to see it, attached a photo of the head gears and pulleys.
Would anyone have a threading data plate that even if it doesn't have the same appearance as mine, has the same data?
Bob kindly took a photo of his for me, but when comparing it to mine, the data is different.
As you will see below, parts of the data are not readable.
.View attachment 269726View attachment 269729View attachment 269730View attachment 269731View attachment 269732View attachment 269733View attachment 269734
Here's the photo. Plus another that gives some detail on the far right section.
Regards,
Terry