I rewired it in the terminal box so the spindle lever works like I want it to and got the bump button to turn the spindle clockwise too. No sparks or smoke!
Now, about the D1 4 cam locks. I thought they were supposed to lock half way between the arrows. They unlock lined up on the "|" mark. From this position, should I turn clockwise or ccw to lock? They don't position like the manual, which is clear as mud.
| is at the top (lets call it 0 degrees). < Arrow 90 degrees clockwise at right. Another ^ arrow 180 degrees at bottom.
1st cam lock will turn ccw 90 between | and ^, or, cw 45 between | and <.
2nd cam lock will turn ccw 135 between | and ^, or, cw 135 half way between ^<.
3rd cam lock will turn ccw 135 between | and ^, or, cw 90 to 1st arrow.
Please advise.
Should the chuck always be mounted using the same cam lock pins in the same cam lock holes?
Thanks, Joe
Now, about the D1 4 cam locks. I thought they were supposed to lock half way between the arrows. They unlock lined up on the "|" mark. From this position, should I turn clockwise or ccw to lock? They don't position like the manual, which is clear as mud.
| is at the top (lets call it 0 degrees). < Arrow 90 degrees clockwise at right. Another ^ arrow 180 degrees at bottom.
1st cam lock will turn ccw 90 between | and ^, or, cw 45 between | and <.
2nd cam lock will turn ccw 135 between | and ^, or, cw 135 half way between ^<.
3rd cam lock will turn ccw 135 between | and ^, or, cw 90 to 1st arrow.
Please advise.
Should the chuck always be mounted using the same cam lock pins in the same cam lock holes?
Thanks, Joe