- Joined
- Jan 31, 2016
- Messages
- 11,432
Ugh . Most likely will acquire the pictured machines and all that goes with them . Lots of tooling and cutters , boxes , saws etc . Not familiar at all with the Jet lathe or WMC mill at all and will probably unload them . Anyone owning these machines please chime in with the pros and cons of them . Unfortunately , the machinist has passed and his wife wants to clean out the basement . And unfortunately again , there is no outside entrance to the basement which means lugging this stuff up inside stairs thru the house and out to the curb . Sounds like a lot of work for such a small gain . Thoughts ?