I finally sprung for the LMS 7x16 bed extension upgrade. But I took it one step further- I added the old 7x10 bed to the 7 x 16 that provides a total of about 26 inches between centers!
To provide a continuous bed, I cut down the 7x10 removing the left side motor and gear box mounting surface and milled open the gap between the ways to match the new bed.
I'll post pix as soon as I get them this weekend.
To provide a continuous bed, I cut down the 7x10 removing the left side motor and gear box mounting surface and milled open the gap between the ways to match the new bed.
I'll post pix as soon as I get them this weekend.