- Joined
- Dec 15, 2018
- Messages
- 27
slowly modifying my minilathe for cnc operation...
currently has closed loop steppers and ballscrews on z and x axes - both addressable with 1u resolution. yes, this is overkill on this lathe
looking to machine an aluminum blank to be finished as an f10, 150mm spherical telescope mirror (finishing not by me)
of course i know that without pix it didn't happen, so with no further adieu:
currently has closed loop steppers and ballscrews on z and x axes - both addressable with 1u resolution. yes, this is overkill on this lathe
looking to machine an aluminum blank to be finished as an f10, 150mm spherical telescope mirror (finishing not by me)
of course i know that without pix it didn't happen, so with no further adieu: