• Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!

  • In order for the Member Map to work properly, you must allow Google services AND Hobby Machinist to know your location. These settings are found in your browser of choice and in your Hobby Machinist profile.

Winner Home Grown Cutter Grinder

Status
Not open for further replies.
Thanks. Heres some pics. I have a thread in the asian import section.

1653341_789956634352631_1744212054_n.jpg 1609667_789389807742647_2088872614_n.jpg 1779761_789390051075956_2082882263_n.jpg 1004956_789389931075968_1878114296_n.jpg
 
I can't see a name but it is the same as most of the 9X20s. It looks exactly like mine but that is not a Jet. Central Machinery was that color blue. I think the Enco was to.

"Billy G"
 
I figured if I needed parts they would likely enter change. Being i am looking for a mill not a lathe, the price dont hurt my mill budget much either.

Thanks for looking. Keep up the awesome work.
 
Bill this is the 5" vise I told you about and my Dad is going to send me info on the 4" he is using now.
As you can see it's almost as high as my Bridgeport vise about 5" high and the swivel base is 1 1/2" high.

5 in hi, 12in long, 4 in jaws wide, 5 - 6 in jaws open is what he told me about his 4". I'm thinking the problem is not the height but the over hang if you notice the vise is in the front t-slot so he doesn't lose travel on Y-axis.

One more time I when out and checked from the front edge to the mount bolts is 6" so once it's mounted even in the front slot he felt he lost to much travel.


Todd

2014-02-19 13.47.06.jpg 2014-02-19 13.47.59.jpg 2014-02-19 13.48.44.jpg 2014-02-19 13.46.29.jpg 2014-02-19 15.03.38.jpg 2014-02-19 15.04.10.jpg 2014-02-19 15.04.21.jpg
 
Last edited:
Off to the recycle place tomorrow to pick up some 1018 to finish this project up.

"Billy G"
 
Sorry guys, things have had to be done in that last few days that just had to get done. There was little time left to work on this. We will resume again very shortly. Again, sorry for the delay.

"Billy G"
 
I have most of what I need to finish this up. Stay tuned folks.

"Billy G"
 
Good news the other 8 books on Workshop Practices Series showed up today, takes about two weeks from Abe Books. Now I'll have to sit down and read them all first is the Spindle book you talked about.

Todd

  • :thinking:
 
Good to hear Todd. Please let us know what you think of the Spindle Book.

OK we are back at it. These will become the Spindle clamps. They are mirror images of each other. The mill is incorporated here for its accuracy over the Drill Press. Three of those holes will have pins in them till the parts are finished. As I said they are mirror images. All of the work on these will be done with my milling machine.

"Billy G"

102_0546 (800 x 531).jpg
 
All the holes are done. Tomorrow we set up the Rotary Table to cut that big hole (2.250 dis.) Today is done.

"Billy G"

102_0547 (800 x 531).jpg
 
Status
Not open for further replies.
Back
Top