Please let us know how it goes..
The original BP mills, I have an M head, were 1/2 Hp.
I also have an 12x industrial lathe I refit with an ac servo drive of 2.5 kW cont. vs 1.5 kW std power on 220V.
This was excellent.
I suspect most mills will not benefit from more power.
The original BP mills, I have an M head, were 1/2 Hp.
I also have an 12x industrial lathe I refit with an ac servo drive of 2.5 kW cont. vs 1.5 kW std power on 220V.
This was excellent.
I suspect most mills will not benefit from more power.