Thanks Rob,
Any idea what the height limit is with the Atlas 7b?
Glenn
About 3.5" with the vise and about 5.5" without the vise mounted to the table. There are a couple of tricks that could possibly get you about an 1" more for items only about 4" wide. For shorter items you can mount them to the side of the table and you could come up with more clearance. It is set up to mount the vise on the side of the table. On the UK lathe info site it states that it is a little over 9" cross feed and I think that is about right. Also as mentioned you should be able to turn the work around and do both sides. Depending on how much time you take on setup and what your tolerances are you shouldn't have any issues. Just a small line where the junction is that should be able to be sanded out.