So I wanted a milling machine, and I thought I wanted a Bridgeport. A Cincinnati Toolmaster showed up on C'list ind I could see from the pics it was a vertical style mill so I decided to broaden my horizons and take a look. Initially I passed because I swallowed the cool-ade and thought it's B'port or nothing. Then I did a little research, messaged the seller back quickly and pulled the trigger. It's paid for and a check has been cut for the rigging co.
Turns out it's a Cincinnati Toolmaster H-V and I'm going f*!*!*!g crazy waiting for delivery. In order to help "cool my jets" I decided to see if the folks on here could tell my anything about it. Sorry about the crappy pictures, it is currently in the corner of a dark garage. If you could tell me what specific head it has I could narrow my research a bit. There is really quite a bit of pubic domain info but it would narrow my searching. Not so much on the H-V model.
Also I believe this is the NMTB 40 toolholder which I understand is a huge plus
Any things I should particularly pay attention to?
Better pics to follow I promise!
Thanks!
Turns out it's a Cincinnati Toolmaster H-V and I'm going f*!*!*!g crazy waiting for delivery. In order to help "cool my jets" I decided to see if the folks on here could tell my anything about it. Sorry about the crappy pictures, it is currently in the corner of a dark garage. If you could tell me what specific head it has I could narrow my research a bit. There is really quite a bit of pubic domain info but it would narrow my searching. Not so much on the H-V model.
Also I believe this is the NMTB 40 toolholder which I understand is a huge plus
Any things I should particularly pay attention to?
Better pics to follow I promise!
Thanks!