- Joined
- Nov 22, 2010
- Messages
- 371
I don't have one that will hold work on my Grizzly SX3 mill the way work should be held.
I know from reading that Kurt vices are about as good as a vice can get.
However I simply cannot afford to spend more than about $100. without getting a ton of ' Hot tongue and Cold shoulder for dinner at home ....and I don't want to deal with that
I have looks on EBay and Craig's list and$300-$400. seeems to be the price range AT BEST... and used doesn't get any cheaper
I would like a 4" to 5" vice that doesn't push up while tightening... i have a Shop Fox6" that turn and angles from grizzly and it is just not decent quality and it is not ... and it was not expensive so i understand.
But I would like to hear from members who have gotten a vice that works well at a price that I might be able to afford.
There might be something out there and a member might know about it
So i will " live in hope .....and die in dispair"
Thanks for any leads
Joe
I know from reading that Kurt vices are about as good as a vice can get.
However I simply cannot afford to spend more than about $100. without getting a ton of ' Hot tongue and Cold shoulder for dinner at home ....and I don't want to deal with that
I have looks on EBay and Craig's list and$300-$400. seeems to be the price range AT BEST... and used doesn't get any cheaper
I would like a 4" to 5" vice that doesn't push up while tightening... i have a Shop Fox6" that turn and angles from grizzly and it is just not decent quality and it is not ... and it was not expensive so i understand.
But I would like to hear from members who have gotten a vice that works well at a price that I might be able to afford.
There might be something out there and a member might know about it
So i will " live in hope .....and die in dispair"
Thanks for any leads
Joe