I may have to be a machinist again !

Tonights progress . Continuing on organizing . HSS tool blanks , cemented carbide cutters , a few thousand taps , couple of tap and die wrenches , countersinks and spot drills and whatever else . It may look like chaos , but it is staged to be moved back up to where it belongs .
 

Attachments

  • IMG_8791.JPG
    IMG_8791.JPG
    1 MB · Views: 29
  • IMG_8792.JPG
    IMG_8792.JPG
    3.7 MB · Views: 22
  • IMG_8793.JPG
    IMG_8793.JPG
    2.6 MB · Views: 16
  • IMG_8794.JPG
    IMG_8794.JPG
    3.5 MB · Views: 16
  • IMG_8795.JPG
    IMG_8795.JPG
    3.4 MB · Views: 15
  • IMG_8796.JPG
    IMG_8796.JPG
    1.4 MB · Views: 15
  • IMG_8797.JPG
    IMG_8797.JPG
    3.3 MB · Views: 16
  • IMG_8798.JPG
    IMG_8798.JPG
    3 MB · Views: 16
  • IMG_8799.JPG
    IMG_8799.JPG
    2.9 MB · Views: 26
I dulled my 5/8" end mill today, have replacements :)
 
I hit the white elephant in the basement . So I'll add a few hundred taps and reamers , scales , boring bars , etc . Those who know the older pics will realize the task .
 

Attachments

  • IMG_8802.JPG
    IMG_8802.JPG
    4 MB · Views: 14
  • IMG_8803.JPG
    IMG_8803.JPG
    3.7 MB · Views: 18
So Iv'e never mentioned end mills in the past 5 years . I have a few . This would take a month or so but they would go thru the Hawain guy . If I have 2000 or so , it is what is is . VTNC ( Bryan) will know why .
 
You posted at the same time as me .:D
 
Back
Top