ID C-frame press

AGCB97

H-M Supporter - Diamond Member
H-M Lifetime Diamond Member
Joined
Apr 22, 2016
Messages
965
I came into 2 of these. Some kind of punch press. ~3.5" cylinder x ~4" stroke. Weighs about 120 lbs. No name and only a long number like a SN. I hope someone can identify it in some way. At 3000 PSI should be about 14 ton.
Thanks
Aaron

DSCF3901.JPG


DSCF3902.JPG


DSCF3903.JPG


DSCF3904.JPG


DSCF3905.JPG


DSCF3906.JPG


DSCF3907.JPG
 
Last edited:
I've not been able to find a picture of anything just like this online but am assuming that it is an old version (not easily portable) of THIS.It looks like this has 3 punches and possibly a corner rounding shear done all at once. I'm going to hook it up to a hand pump today and see what happens.
 
Its a hydraulic / mechanical punch, almost like a punch press but simpler.
 
I have a electro/hydraulic pump, valve and hoses and plan to make something with it when I get time (probably winter).
 
Nice find, lots of winter in Iron Mountain ;)
 
Back
Top