• We want to encourage those of you who ENJOY our site and find it USEFUL to DONATE and UPGRADE your membership from active member to donating or premium membership. If you want to know the differences in membership benefits, please visit THIS PAGE:

    https://www.hobby-machinist.com/premium/

    Donating memberships start at just $10 per year. These memberships are in fact donations that help pay our costs, and keep our site running!
    Thank you for your donation, God Bless You

  • As some of you know, I have wanted to stop managing H-M for some time. It's a tremendous strain on my personal life. I want to set up my own shop. In September, September 15, to be exact, it will be 8 years that Hobby-Machinist has been in existence.

    I have been training VTCNC to run things here. Dabbler is going to learn too. I feel that they are ready to start taking over the operation. I will be here to help in case they need, but I don't think they will. Tony Wells is and will be here also to consult with. I will be doing backups, upgrades, and installing addons. Other than that, I will not be around. I am leaving this place in good operating condition, and financial condition.
    --Nelson
[4]

I'm looking at Sieg KX1 / LMS 3501 CNC mill, any one know if it is any good?

[3]
[10] Like what you see?
Click here to donate to this forum and upgrade your account!

aseem

Swarf
Registered
Joined
Sep 14, 2014
Messages
2
Likes
0
#1
Hi everyone, my first real post. I have searched high and low for a review or other information about the Sieg KX1 aka LMS 3501 mini CNC mill. I have just discovered that LMS has stopped selling it, and that with the fact that there is so little information to find on the internet worries me.

I posted an introduction of myself and my milling objectives here: http://www.hobby-machinist.com/showthread.php?t=25862

I would appreciate it if you can provide some info about this unit, or point me in the right direction.

Thank you.


Arnljot
 
[6]
[5] [7]
Top