In need of a Grizzly G0709 expert

[Rudar2018]

I'm in need of someone who knows how the gears in the lower gear box should be aligned. Tia.

 

[DAT510]

Welcome to H-M.

A little more info on what you mean by "aligned" would be helpful.
Is the gear box taken a part and you need to know how it goes back together?
Are you trying to set the gear box to a specific feed rate?

Here's a link to the factory manual, if that helps? https://cdn0.grizzly.com/manuals/g0709_m.pdf

 

[Rudar2018]

No it was not completely disassembled. The face door was removed. The three upper gears are easy enough to figure out but the numbered cylinder with the slots is what is out of alignment

 

[KBeitz]

Did you look at Grizzlys PDF file?

https://cdn0.grizzly.com/partslists/g0709_pl.pdf

 

[Rudar2018]

We have the grizzly manual. It does not explain the alignment of any of the gears