Insert ID

[DavidR8]

I bought some used indexable end mills but I'm struggling to figure out what inserts they take.
One is a Valenite 8T9
S-VMSP-100R-90CC

Another is a Kennametal KIPR-1
25-AE24-0
The insert in this one is stamped KC710

Googling provides nothing that seems to make sense.

 

[DavidR8]

Found the insert for the Valenite: SECW 2.51.51

 

[davidpbest]

KC710 is the insert grade - it tells you nothing about the shape or size.

The top photo is a Walter Valenite part #50682. According to my research it Uses SD 322P Insert Style. MSCDirect sold it before it was discontinued. Call them and they should be able to tell you the exact insert designation codes. Here is the link to the product on their web site.

I believe this is the Kennametal KIPR-1 25-AE24-0. It takes the AEC 2422 insert style.

 

[DavidR8]

Thanks @davidpbest, clearly a better Googler than I!

 

[mmcmdl]

Looks like the one is this cutter Dave . 'll check my inserts .

 

[DavidR8]

Looks like the one is this cutter Dave . 'll check my inserts .

Thanks Dave!
(apparently all the Dave's are on this thread )