Installed X-Axis Power Feed - Does it sound right?

Mind if I steal your thread?
This is the Precision Mathews power feed I am mentioning.
I recently purchased a Sharp LMV knee mill. Going through it I found the Servo Type 150 X feed fairly well shot.
I ordered a PM replacement through Matt’s guys.
Being new to power feeds Igot educated real quick.
The power feed would not mount due to the table screw and adapter configuration, see pics.
Long story short, I returned the PM feed, working with the technical dept. at PM, I discovered all power feeds were not going to mount. I will reorder from Matt.
Great service!
I think I’m going to order a PM1440 H.D. Now that Ihave experience with these great folks, I can have confidence knowing they will have my back!
C7F2186A-B9B4-4A8D-9BBB-01A1C37490DF.jpeg
AA9E2632-EE87-4884-B76B-39D8735377D8.jpeg
AA9E2632-EE87-4884-B76B-39D8735377D8.jpeg
F98391E0-1E3F-483F-A3C5-DFD7678DA56A.jpeg
5020274A-B5CB-4014-A5F1-21382928E9D9.jpeg
 
Back
Top