I have that exact VFD running my 5hp King Rich mill and it works a fine. Because I am limited to 20amps at my house I also have the VFD ramp the motor slowly to limit the inrush current.
I can not read the details in the photos, but the motor needs to be wired for Delta not Y (Star). These VFD's will not put out more voltage than the mains feeding them. So in my case 240V AC, my motor was 415V I had to open the motor and bring the Y connection out so I could connect the motor to the VFD in Delta 3 phase which is 240V per phase.