John Deere F935 rebuild

In the past i've used "EZ slide" graphite paint on the underside of mower decks. It works great in that there isn't any build up of grass in the corners that will rot and cause rust. It used to be available at nearly every farm store, but I haven't seen it in the last few years. I have one quart left which I intend to use on the mower deck of my JD 445. One application usually lasts 2 years. Hopefully by the time it's gone I'll find another local source.

Here's a link to some available from Amazon:

https://www.amazon.com/Ez-Slide-Graphite-Coating-1-Quart-Rb-9512/dp/B000I1E7NW

It seems the last time I bought it a quart locally was about half as much as they are asking
 
Well done Greg.

You just need to top them all off with some new decals. :encourage:
 
^^^What Randy said^^^ turned out great man.

Paco
 
Funny you should mention the decals. Charlie and I were looking into it, thought about buying a plotter for cutting custom decals, then looked at the cutter assembly they use and wondered if if could be mounted to the plasma table and make our own plotter.

Greg
 
That John Deere will never be the same with all that yellow.
Nelson
 
Last edited:
Back
Top