Kent Ktm 380v Adding Power Feed

BT1911

Registered
Registered
Joined
Oct 12, 2016
Messages
2
Hi all, first post here. I have a 1981 Kent KTM 380v which is a BP series I variant from Tiawan, and Kent doesn't have the information on which power feed for X and y axis are correct. They say it is a variant of the BP and not a direct clone so not all parts interchange between a BP and the Kent machine. Servo products gives me a part number for the Kent 3VK. If anyone here has added feeds to thier Kent KTM 380 and could chime in on which ones work it would save me a lot of frustration I am sure. Thanks for the great forum btw!
 
Back
Top