Knobs Needed Lol

BillyT

Registered
Registered
Joined
Feb 12, 2014
Messages
11
I'm looking for 3 knobs like the ones in the pictureknobs.JPG
 
Try, Carr-Lane, McMaster Carr. Might take a peek at E-bay for used knobs, lots of stuff to refurbish a lot of machines.
 
There's a seller on eBay who specializes in Atlas equipment. Name is something like "joelr7052"; he might have what you need if you're after original knobs. Some of his prices are high ($195 for a stock AXA 5-piece QCTP, identical set from CDCOtools.com for $110 or $45 for a link belt which is $24 from HF), some more reasonable ($20-$25 for your lathe's QCGB and spindle placards).

Bruce
 
I'd have a go at making them if I was you :)
It just looks like a straight knurl on the outside so that shouldn't be too hard if you have a knurling tool.
If you do make them post a picture so we can see your handy work !
David.
 
Back
Top