Kool mist air valve

dlane

Active User
Registered
Joined
Sep 27, 2014
Messages
3,123
Got tired of reaching over the mill table to turn on and off the kool mist, so I put the valve on the table with a t nut and bracket.
B2FA5C98-AD0A-4779-A2E4-40C000C45F56.jpeg
3DB49F85-724C-4296-A54F-1EF7D915D4A7.jpeg
I’m using a small nozzle tip and haven’t noticed any fog in the air
F631701F-8675-4771-9B95-3D7A441EC675.jpeg
Hopefully my end mills will be happier now
 
I used a ball valve but it functions the same way, mine is attached to a portable (12"x12") metal frame and a water filter canister .I find these manual valves easier to install than the 12 volt air valve/solenoids.
 
Back
Top