L0 Spindle Internal Taper

Fwiw, he measured that taper over about 600 thou, so if he was off just 3 thou over the two measurements, it would account for the difference.
Yeah, that should be re-measured over a much longer length, preferably the whole taper, but at least a couple of inches.
 
RobertB - You are correct - That adapter looks to be for the shorter "D" type spindle nose.
Mine is a "L0" type which has a longer nose.
The useful information from that drawing is the description of the outside taper, which is the inside taper of my spindle.
The diameters and length would not be appropriate for the L0 spindle nose.
 
Back
Top