Lathe Auto-drive Gearbox - Dominion - oil change and running

Today I've been working on a design for replacing the new-ish hex nut with one to look more like the original which would have come with the machine. The test one I made functions very well, however it is too long and I don't want the bolt to show through the end, so I'll make a new one about 1/2" shorter.

20181028_172922.jpg

The new one will be a little more refine also.

Tip, if you boil steel in vinegar, it will react and etch the steel within 2 minutes, it makes the steel look more aged so that it looks like it belongs.
 
Here is an update on the progress, I had some interest in the lathe and I thought I should share in video form in hopes that it's a little more interesting.

Progress Update and Projects

Take care,

Dusty
 
Back
Top