- Joined
- Dec 22, 2015
- Messages
- 561
I've been having issues with my lathe motor and got a replacement for it, from lathe distributor, King Canada. The motor wiring schematics are identical on both motors but the new one has a jumper across 2 terminals that are not jumped on the old motor. I am thinking of taking the jumper off and running the wires to the same terminals as the old motor setup. Here are the pics of the 2 motors.
The existing one with wires still attached.
The new one. See the jumper across the right 2 terminals.
Thoughts please.
The existing one with wires still attached.
The new one. See the jumper across the right 2 terminals.
Thoughts please.