- Joined
- Dec 27, 2013
- Messages
- 44
Pencil lazer clamped to mill head, small angle plate screwed to mill base. Pencil lazer has a
plastic cap (magic marker cap) #51 drilled in cap (to narrow lazer beam) and #51 hole drilled
in angle plate. Align beam with hole in plate. Cap is lopsided, hole is off center.
plastic cap (magic marker cap) #51 drilled in cap (to narrow lazer beam) and #51 hole drilled
in angle plate. Align beam with hole in plate. Cap is lopsided, hole is off center.