Logan 1815 resto

Hey everyone got all my proper lubes,put everything back together and everything seems to be running smooth. I still have to make some adjustments with the gibs. So as far as the issues I had I was able to address all of them and everything is working smoothly. I adjusted the power feed clutch and that is working properly, the play in the head stock is gone, idk what the issue was only thing I could see was the v belt pulley set screws weren’t tight not sure but there’s no play now. The headstock cover is sitting right now that everything is leveled, I did have to adjust the rear hinges and the bolt on bottom for motor height as well to get cover to sit right.I had a piece of brass I was able to face it just to play around any suggestions on a first project?
View attachment IMG_3444.MOV
View attachment FullSizeRender.mov
View attachment FullSizeRender.mov
 
Back
Top