- Joined
- Nov 22, 2010
- Messages
- 371
I acquired a circa 1950 Logan 820, Disassembled... 4 years later and the parts pile is still in the corner of my shop. This week since I cannot work ( Corona Virus induced) I mistakenly thought I was missing the front apron for the carriage I intended to sell it after assembly If any one is interested Please contact me at joebiplane@comcast.net and lets see what we can work out. I would consider delivering the lathe for expenses
I am located in South Jersey about 30 miles south East of Philadelphia. I was not going to use the lathe myself as I have a magnificent SB Heavy 10 from 1942 that I restored and will keep as I am a 1942 model also.
It is in original 70 year old condition with Not a spec of rust but needs a repaint .All gears are in excellent condition as are the ways, bearings etc. It is an excellent specimen to put back into original factory condition if you have the time to put in....You will be rewarded with a "Jewel" of a Logan 820 with a good number of options and tooling
Thanks for your interest
Joe Larsen
I am located in South Jersey about 30 miles south East of Philadelphia. I was not going to use the lathe myself as I have a magnificent SB Heavy 10 from 1942 that I restored and will keep as I am a 1942 model also.
It is in original 70 year old condition with Not a spec of rust but needs a repaint .All gears are in excellent condition as are the ways, bearings etc. It is an excellent specimen to put back into original factory condition if you have the time to put in....You will be rewarded with a "Jewel" of a Logan 820 with a good number of options and tooling
Thanks for your interest
Joe Larsen
Last edited: