Logan 820 Electrical Issue

Looks good, but be sure that the capacitor on top doesn't interfere with the drive box above. Is a drawing available for
that motor?
 
If the start capacitor being on top isn't a problem, it should work. You just won't use the C-frame mounting holes.
 
Thanx Gentlemen,

This being a " Hobby" Lathe, I am relatively sure this unit will do fine. I have studied the drawing ( Which is on the Ebay listing ) and the specs.
This motor will fit were the old motor is mounted.

Class F Winding insulation to HD BB on both ends. There are more expensive motors, but then, so, if this one lasts 25 years vs the top of the line going 50 years, well really, I do not care. My Grandson may need to change out the motor, good for him, builds character !

My Electrician neighbor and I will replace all the Drum Switch wiring with new, and we should be good to go !

This whole project revolves around a Hobby Machine. If I were in a Production shop, well then a $ 50K Hass CL1 would be the order of the day.

Thanx for your patience and help.
CDBEAM
 
Back
Top