- Joined
- Jun 16, 2016
- Messages
- 221
After building an Electronic Leadscrew for my Logan Model 200 and using it for a while, I started thinking that an adjustable stop on the crossfeed could be very handy.
I designed something to directly replace the factory crossfeed bushing (LA-689) and give me 2-1/2 turns stop to stop. I found some inspiration in the design of the crossfeed stop used in the Monarch 10ee. It's still a prototype, and I need to loosen up a tolerance or two, but it's functional.
And I made a video!
I designed something to directly replace the factory crossfeed bushing (LA-689) and give me 2-1/2 turns stop to stop. I found some inspiration in the design of the crossfeed stop used in the Monarch 10ee. It's still a prototype, and I need to loosen up a tolerance or two, but it's functional.
And I made a video!