Logan Model 200 Crossfeed Threading Stop

[Briney Eye]

After building an Electronic Leadscrew for my Logan Model 200 and using it for a while, I started thinking that an adjustable stop on the crossfeed could be very handy.

I designed something to directly replace the factory crossfeed bushing (LA-689) and give me 2-1/2 turns stop to stop. I found some inspiration in the design of the crossfeed stop used in the Monarch 10ee. It's still a prototype, and I need to loosen up a tolerance or two, but it's functional.

And I made a video!

 

[benmychree]

Very clever! If I had not just made simple thread stops for both of my lathes, I think I would do like you have done; mine were made just like the original ones that would have come with the lathes, one a 40s Regal Leblond, the other, a 1920s Monarch.