Looking for a part for my atlas lathe..

Opie_7afe

Registered
Registered
Joined
Jan 28, 2019
Messages
26
I have an atlas 10d and i need the washer that goes behind the screw gear part number 9-114..called clausing and they wanted $52 for that washer..so figured i would ask here to see if anyone has a lead for me. Thanks!
 
You might be able to find one on Ebay. I made one for my 6" Atlas, took some careful filing to make the inside slot for the key but it can be done by hand.
Mark
ps you can also use one of the smaller gears as a spacer
 
Sometimes takes a while, Ebay stuff seems to be seasonal. Long period of drought and then a whole bunch of stuff appears
M
 
If you don't want to make one, maybe give Joel a try at mymachineshop.net
He doesn't show one one his page at the moment, but I suspect he has a lot more inventory than is actually posted. Be worth asking anyway.

-frank
 
Well i found a bronze sleeve thats the right size i.d the. O.d is bigger which is no big deal, got it turned down so need to cut the keyway and im all set..thanks guys!
 
Back
Top