Looking for Tailstock on DSL-1237GH

What I'm looking for is a good pic of the plate off the machine, I'm thinking about having a sticker printed to put on the plate to restore it to original readable condition. Thanks!

I hope to get into the shop today if it ever warms up a little, got to do some painting on some handrails if it ever warms up lil more.
 
At a glance, it looks favorable. I have some work this morning, and a funeral to attend this afternoon. I'll get a look as soon as I ccan and let you know.
 
photo.JPGphoto 1.JPGphoto 2.JPGphoto 1.JPGphoto 2.JPGphoto 3.JPGI believe these are close, but the spindle height is wrong. One is ~6 1/8" and the other is ~7 1/8". If you wanted to, it's probable that the base casting could be cut down. I'll get more dimensions if you need them.

photo.JPG photo 1.JPG photo 2.JPG photo 1.JPG photo 2.JPG photo 3.JPG
 
Back
Top