Machining on the big screen

[rwm]

I wish I could. Actually it was publically streaming to YouTube, but we have a forum rule against linking to your own YouTube channel due to some abuses by a couple of members. As far as I know there is no way to live stream directly to H-M.

I did not know about that rule. Seems like we could really be missing out on some neat videos?

Robert

 

[Firestopper]

Damn that’s cool Jim.

 

[jwmay]

The company I work for used to have something similar for one of their turning centers. Well more like cctv. But I believe they decided they wanted the operators out of the office and standing at the machine where they could be more easily accounted for. Somebody probably fell asleep in there.

 

[Bill W.]

Here is the finished product. Without optimizing the G code and tooling it was about an 9 hour run. We'll cut that down to about 2 hours on the next run.

View attachment 258485

Jim... What are they? They look like half flanges for air or hydraulics...

 

[JimDawson]

Jim... What are they? They look like half flanges for air or hydraulics...

They are the lower leg brackets for this. https://www.stablecamper.com/