Making flat washers

[Martin W]

Try this method. Different language but works good.

Cheers
Martin

 

[Martin W]

Try this one instead. He has a couple videos. I have them mixed up

i know they are for bigger washers, but still might help someone.
Cheers

 

[Winegrower]

Humm...your clutch pressure plate will make them all the same, in time.

 

[brino]

I think Joe Pieczynski has a good video on this. Found it:

This is the Joe Pie video I thought of when @Aukai asked about making washers to thickness......

-brino

 

[Reddinr]

This is the Joe Pie video I thought of when @Aukai asked about making washers to thickness......

Ah, yes. That's the one that shows it better!

 

[westerner]

Joe Pie is brilliant. He has videos addressing many of the technical issues we all come up against sooner or later, and some we never will.
His problem solving skills and down-to-earth method of explaining them are some of the best on the Web, in my humble opinion.

 

[Aukai]

I cut 16 clutch discs, and made a horrible mess on the lathe, I had to equalize the 32 sintered iron facings to 1.5" taking out from the center. He has a clutch facing machine, but can only do the full face, it was a marathon.
I did not get on with the cert problem, I'll check the links tomorrow at work, thank you guys for them.