- Joined
- Feb 6, 2020
- Messages
- 256
curious to see what different methods come up for this exercise.
you have a (rough) cast iron casting approx 6.5"x6.5"x3/8". (3/8 we'll call the edge). one side has a feature somewhere towards the center. - we'll call that the bottom - therefore we only need to square the perimeter of the bottom.
due to the thickness you need to take a minimum of material off. you only have a 6" vise.
what would your approach be.
pick your machine(s)
you have a (rough) cast iron casting approx 6.5"x6.5"x3/8". (3/8 we'll call the edge). one side has a feature somewhere towards the center. - we'll call that the bottom - therefore we only need to square the perimeter of the bottom.
due to the thickness you need to take a minimum of material off. you only have a 6" vise.
what would your approach be.
pick your machine(s)