Mill lathe

tomfiii

Registered
Registered
Joined
Sep 4, 2011
Messages
25
Have a Huangshan drill/mill -lathe. Anyone know anything about this?
 
Here it is.

IMG_0825.JPG
 
It looks similar to the Shoptask and the Smithy, check online for info, they may be very close to yours. Most folks say the milling head is somewhat limited in capability, but they can do good work if you are aware of the limitations. I have heard the motors burn out occasionally, but otherwise they are fairly rugged machines
 
Last edited:
Very similar if not the same as the grizzley G4015Zg4015z-1af23a3b607d3be53511389fa852dc57.jpg


Nice if you have space limitations. A but awkward to use, as the side movement is the knob at the right end of the machine. Better off with a lathe, and a mill. The main thing I use my Shoptask for, is brake drums, and wheels, which won't fit on my lathe. The 16.5" swing is hard to get at that price.
 
Back
Top