-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Milling a curved slot in 3/8 steel bar.
- Thread starter RB72
- Start date
- Joined
- Sep 29, 2014
- Messages
- 2,102
I used to make dozens of these at a time in a manual BP with a 12" Dia. rotary table. Would not do this job in a manual machine again, ever.
Diverters made of UHMWP for a shoe sorter, bolted a 5" wide X 1" thick steel bar to the T-Slots then screwed the parts to it using their finished mounting holes and swung the 15" radii. Of course they must be rotated on the fixture to do both sides.
Diverters made of UHMWP for a shoe sorter, bolted a 5" wide X 1" thick steel bar to the T-Slots then screwed the parts to it using their finished mounting holes and swung the 15" radii. Of course they must be rotated on the fixture to do both sides.