Milling vise ID

[Liljoebrshooter]

I have a vise that came with the mill I bought and wondered if anyone could identify the brand maybe?

It had a tag on the left side but is gone. It is in pretty good shape but the moveable jaw needs some attention. It has quite a bit of movement.
It didn't have the jaws on it so I will have to make some for it.
Thanks for any info

 

[mmcmdl]

Looks like an old Kurt . The old Kurts had the plate on the left side , there should be 2 rivet holes spaced at 2 3/8" .

 

[Shootymacshootface]

I agree, I believe the MT6A would indicate that it is a 6" Anglelock vise.

 

[Liljoebrshooter]

Here is a picture of the other side. The rivets are about 2.37 apart.
I didn't think this was a Kurt, but I am happily surprised.
Thanks for the help guys.