Mini Excavator rebuild

Finally back to work on the excavator. 2 parts bored out and inserts pressed in.
Tomorrow the last 2.

1assy.jpg

2assy.jpg

3assy.jpg

4assy.jpg

5assy.jpg

6assy.jpg
 
Some more progress on the excavator parts. The fork parts are yellow zinc plated.
The tensioner nuts, shaft seal plate and bottom roller covers are made and welded in the housing, sandblasted and a coat of paint to keep from rusting.
Next will be the guide parts for the fork and cover for the track adjuster.

Denny
 

Attachments

  • Zinc fork 2.jpg
    Zinc fork 2.jpg
    39.3 KB · Views: 17
  • Zinc fork.jpg
    Zinc fork.jpg
    37.8 KB · Views: 17
  • t1.jpg
    t1.jpg
    22 KB · Views: 17
  • Tensioner 8.jpg
    Tensioner 8.jpg
    26 KB · Views: 17
  • Shaft.jpg
    Shaft.jpg
    52.2 KB · Views: 18
  • shaft2.jpg
    shaft2.jpg
    37.3 KB · Views: 18
  • Shafts.jpg
    Shafts.jpg
    31.7 KB · Views: 18
  • Socket.jpg
    Socket.jpg
    46.7 KB · Views: 18
  • Tensioner 6.jpg
    Tensioner 6.jpg
    36.7 KB · Views: 18
  • weld2.jpg
    weld2.jpg
    42 KB · Views: 18
Back
Top