- Joined
- Oct 3, 2015
- Messages
- 982
You don't need RT or indexer, that's what the SQUARE wood blocks are for. The hole in the square blocks is centered. Make a saw cut on one side of the block, put a screw in it to squeeze it back together around the barrel.. Now you have a barrel centered in a box.
Clamp it directly to the table, and bolt down some stops on 2 sides to locate it after you flip it 180 degrees.
Clamp it directly to the table, and bolt down some stops on 2 sides to locate it after you flip it 180 degrees.