- Joined
- Dec 8, 2014
- Messages
- 84
Made a new tool post locking knob. the Allen bolt was driving me crazy.
Bored out the bottom to set down over the aluminum sleeve to help center it.
Re-purposes one on the stock levers but I'll probably replace it. Finally ground my own HSS bit, cut really well, better than the HF one on Al. Need to try it on steel.
Bored out the bottom to set down over the aluminum sleeve to help center it.
Re-purposes one on the stock levers but I'll probably replace it. Finally ground my own HSS bit, cut really well, better than the HF one on Al. Need to try it on steel.