Need a small part done

JimW816

Registered
Registered
Joined
Nov 30, 2017
Messages
11
I need to have a small part done. If someone can help me please get in touch with me . Please see attached drawing. Thanks
 

Attachments

  • headshell.pdf
    808.2 KB · Views: 313
Got a pic ? , no room in iBooks for it,
 
Thanks for replying. Here is the jpg. Let me know if you are not able to see. I can change M3 to #8 screw if you need to. I also can make thread myself in order to save your time.


headshell.jpg
 
Last edited:
Is this what you are looking for? Or is it dished out like a bowl?
And, I don't know if I can make it (need to think on it) - I was just trying to draw it!

HM Bracket v1.jpg
 
I know very little about Sketchup. Here is what I did to combine 3D with 2D. I can change things to fit your tooling and machine if necessary. Thank you!

headshell-final.jpg
 
Last edited:
Yes what's with the "8" dimension up top next to the "13", it only shows in the one view
M
 
Also be careful, it is first angle projection and not third.
 
I didn't notice the dashed lines so I modeled it upside down the first time. the 1mm dim is not right as is the side view not depicted correctly.

This is what I came up with.

clamp2.jpg
 
Back
Top