- Joined
- Oct 18, 2016
- Messages
- 2,872
I need to ream a 1/2" hole inside a 3/4" diameter piece of 12L14, 3 inches in length. I have a 1/2" chucking reamer to do the job. What diameter hole
should I drill/bore prior to using the reamer? And, should I ream under power a little at a time, or do it manually on the lathe without power?
should I drill/bore prior to using the reamer? And, should I ream under power a little at a time, or do it manually on the lathe without power?