- Joined
- Dec 3, 2013
- Messages
- 1,844
Unfortunately a contactor is too large to fit.24 vac is common control voltage so look up industrial contractors.
You can find many options, if you have a Grainger store they have many.
Amazon also has them.
Coil voltage needs to be 24vac.
Contact rating does not need to be same, bigger is better.
Sent from my SAMSUNG-SM-G930A using Tapatalk
The manufacturer recommended a $40 board that has a relay and transformer to replace the individual ones in the unit. I have it working for now so I will go that route when is locks up again.
Thanks for all the replies.