Need info / manual for Enco 11-2011


May 15, 2021
I have an enco 110-2011. I would like to order a new back plate and 4 Jaw chuck. Was hoping someone here could point me to a downloadable manual or other info on this lathe. Thanks.


Confirmed Tool User
H-M Lifetime Diamond Member
Jan 2, 2014
Hi @ebourlet

Welcome to the group!

Okay so that's three new members recently looking for Enco info.

We do have some manuals on this site, but downloading them is limited to paying users to help defray server costs.
The membership levels here:
shows that for a $20 per year "Silver" membership you would have full access to the downloads area, and also no ads!

I do NOT know how to decode the Enco lathe model numbers, but below is a list of what we have here in Enco downloads section.

You also might try posting in the Enco-MSC-Vectrax forum here:




H-M Supporter - Gold Member
H-M Supporter Gold Member
Oct 20, 2016
The Enco 110-2011 looks like it too is in the "Jet" family of Lathes. You can find more info about Manuals in Post #9 of this thread.

Also, beware there were many combinations of threaded spindles for these lathes. Inch Diameters w/ Inch Threads, Metric Diameters with Inch Threads (Yes they mixed them). So don't trust the manuals, you'll need to measure your spindle diameter and TPI to get the correct Backing plate.

Hope this helps.
Last edited:
It can take up to an hour for ads to appear on the page. See our code implementation guide for more details. If you already have Auto ad code on your pages there's no need to replace it with this code
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock