Need Wiring Help For Central Machinery 3-in-1 Lathe Mill

[Raflleje]

Hi , my first time posting so I hope some would be kind enough to draw a diagram for me for harbor freight lathe mill combo. Most wires in the control box are disconnected and the manual I can't understand. It would be highly appreciate if someone could help out. Thank you

 

[JimDawson]

From the picture, it looks like only the ground wires are disconnected. The grounds should all be connected to the frame.

Can you supply a part number for the machine? It will help find the manual.

 

[Raflleje]

Sorry. Just realized I uploaded wrong picture. Harbor freight central machinery #44142.

 

[Raflleje]

Here's the schematic which I can't really understand. There's a contractor, 2 drum switches, a twist stop button, a green on button, a power light,and plunger switch on the door

 

[Raflleje]

Here's the schematic which I can't really understand. There's a contractor, 2 drum switches, a twist stop button, a green on button, a power light,and plunger switch on the door

 

[Mad Monty]

Didn't see the thread end, assume you figured it out by now. If not, let me know, maybe I can help. I have same or similar machine.