Needed A Bricksaw

danleereed

Active User
Registered
Joined
Feb 14, 2014
Messages
28
Howdy folks,
I had some guys working on a furnace door. They needed a way to cut the insulating bricks off flush with the steel in the door casing. I had just recently bought a 5'x10' CNC Plasma Table.
So I went and designed/ roughly copied a tooth pattern from a wood saw. These pictures show the outcome. I get to make a lot of neat things in the duties of my job.



I'll post some more projects soon.
Thanks for looking,
Dan Reed

Brick needs cutting.jpg Complete saw.jpg It works, nice and flush.jpg saw cut 2.jpg saw2.jpg
 
Back
Top