- Joined
- Nov 7, 2017
- Messages
- 17
Hi guys so I just got a new grizzly knee style mill (link below) So I also have a small taig mini mill that I mounted a dro on wich was prity easy as the whole head moves up and down on that one. So I would like to mount a DRO on the new grizzly for the up and down motion of the quill...I have been told mounting it on the knee and using the knee for up and down is easier but I really want it on the quill. So I have a dro but its way to big its like 17 inches so I looked around and saw there are some smaller ones ......I have never mounted one like this and I want to make sure I get it right on the first shot I am assuming I would have to drill and tap holes in the mill to attach it and I don't want a half dozen holes in my new mill cause I drilled in the wrong spot....So any help wuld be appreciate from what dro would work good in this situation to where and how to mount it like I said ANY help would be appreciated thanks guys!....oh here is the link to the mill I got
http://www.grizzly.com/products/8-x-30-Vertical-Mill/G0730
http://www.grizzly.com/products/8-x-30-Vertical-Mill/G0730