New to me Kondia Powermill FV-1 Step Head

[Mark S. Cohen]

I just acquired this milling machine and it is as many know a close cousin to a Bridgeport J head. I don't have a manual for this but will be ordering one very soon. In the meantime I want to get it running but it appears to have a different lubrication set up on the head. There is what looks like a small ball oiler on one side of the gear area under the motor and the typical oil cup on the other side. So, my questions is, if anyone out there has one, what are the proper lubricants for these 2 spots? Also the machine has a one shot oiler for ways etc but upon filling it and attempting to push the handle in I found I had to "put my back into it" to get it to move. I've never had one of these and wonder how much force should be required. It does seem to be working but way too difficult.
Thx in advance for any help.

I know your post is pretty old but now wondering if you can help identify what each of the oiling holes are on my Kondia mill. Thank you, Mark C.

 

[Shiseiji]

I know your post is pretty old but now wondering if you can help identify what each of the oiling holes are on my Kondia mill. Thank you, Mark C.

A manual is posted here and information about obtaining others.

Looking for a Pdf MANUAL for a Powermill Kondia FV-1. KV variable.

HI All. Looking for pdf service manual or electrical diagram for a Powermill Kondia FV-1 vertical turret mill (non cnc) Just bought a non runner for small money. Told motor was rewound and probably wiring issue. I can work these things out but the older wiser me tell me get the manual first :)...

www.practicalmachinist.com

EDIT. The main one only talks about using the oiler, no information on what it's connected to. Sorry.