I picked this up on another site,the guy didn't like to bother to change his chuck to work between centers.
My lathe did not come with a center for the headstock or the adapter so I thought I would give it a try.
I had a piece of 1" so I cut down one end to 5/8" turned it and added a tapper(Took a good while to figure that out)
Now I can work between centers as well.
brian
My lathe did not come with a center for the headstock or the adapter so I thought I would give it a try.
I had a piece of 1" so I cut down one end to 5/8" turned it and added a tapper(Took a good while to figure that out)
Now I can work between centers as well.
brian
Last edited by a moderator: